Rules Analysis
Traveling: The thrower must establish and continually maintain a pivot at the appropriate spot on the field until the throw is released. Failure to do so is a travel and is resolved according to 17.K.3, below.
Resolved according to 17.K.3 only if the travel is called, otherwise play continues uninterrupted.
If the travel occurs and no pass has been attempted:
Play does not stop. The defense (typically the marker) points to the spot where the travel occurred, and the thrower returns to that spot without delay. The thrower must touch the disc to the ground before attempting a legal pass.
Play does not stop, but the disc is live, so it is still subject to a turnover (for example if the thrower drops it).
The stall count is paused until the thrower sets a pivot where the travel occurred. The marker is not required to say "stalling" when resuming the count. The thrower must touch the disc to the ground before attempting a pass.
The marker must initiate a stall count with the word "stalling," but resuming the count does not require the marker to say "stalling" again.
If the thrower wishes to contest the travel call, they announce "violation" and play stops. Upon checking the disc in, the stall count resumes at the count reached plus 1, or 6 if over 5 (15.A.5.a.3).
If the defense does not indicate to the thrower where the travel occurred, or the thrower wishes to contest the location of an indicated spot, the thrower should announce "violation", stopping play, and explain that the spot was incorrectly/not indicated. After setting their pivot in the correct spot, and checking the disc in, the stall count resumes at the count reached plus 1, or 6 if over 5 (15.A.5.a.3).