Rules Analysis
WFDF 2017 Rules
9. Stall Count
.
9.6.
6
.

To restart a stall count "at maximum n", where "n" is determined by 9.5.2, or 9.5.4, means the following:

This rule was changed from the previous rulebook version
This rule was added from the previous rulebook version
This rule has updates in the next rulebook version
9.6.1.

If "x" is the last number fully uttered prior to the call, then the stall count resumes at "Stalling (x plus one)" or "Stalling n", whichever of those two numbers is lower.

If, after a call, a stall count is to be restarted at maximum 6 and:

  • the stall count was stopped at 4, the stall count restarts on "Stalling 5"
  • the stall count was stopped at 8, the stall count restarts on "Stalling 6"  
    There does not need to be a gap between "stalling" and the number of the count.
Related
Versions
Cross-Rulebook
9.6.1.
Children
9.6.1.
Associates
WFDF 2021-24 Rules
9.6.1.

If "x" is the last agreed number fully uttered prior to the call, then the stall count resumes at “Stalling (x plus one)” or “Stalling n”, whichever of those two numbers is lower.

If, after a call, a stall count is to be restarted at maximum 6 and: - the stall count was stopped at 4, the stall count restarts on “Stalling 5” - the stall count was stopped at 8, the stall count restarts on “Stalling 6” There does not need to be a gap between “stalling” and the number of the count.If there is a disagreement that cannot be resolved about what number the stall count should restart on, the midpoint between the two proposed stall counts should be used, rounded down.

View Source
View direct source