Rules Analysis
Traveling: The thrower must establish and continually maintain a pivot at the appropriate spot on the field until the throw is released. Failure to do so is a travel and is resolved according to 17.K.3, below.
If the travel occurs and no pass has been attempted:
The spot where the travel occured is the spot on the field where the thrower's pivot would have been had they not traveled. If the thrower threw from either the end zone or out of bounds, and their pivot was more than one step from the appropriate spot, the following procedure is used instead: First, the disc is checked in where the thrower threw the pass, making it live, then the thrower walks to the appropriate spot for their pivot and puts the disc in play. At this point, the stall count may resume.
The stall count is paused until the thrower sets a pivot where the travel occurred. The marker is not required to say "stalling" when resuming the count. The thrower must touch the disc to the ground before attempting a pass.
Play does not stop, but the disc is live, so it is still subject to a turnover (for example if the thrower drops it).
The stall count is paused until the thrower sets a pivot where the travel occurred. The marker is not required to say "stalling" when resuming the count. The thrower must touch the disc to the ground before attempting a pass.
The marker must initiate a stall count with the word "stalling," but resuming the count does not require the marker to say "stalling" again.